Panasonic Diga DMR-ES45 Operating Instructions Manual

Contents

Panasonic Diga DMR-ES45 Operating Instructions Manual Manual pdf 40 page image

40RQTV0141Using on-screen menus/FUNCTIONS window and Status messages[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [DVD-A] [DVD-V] [-RW‹VR›][VCD]PictureTo select the picture mode during playNormal: Default settingSoft: Soft picture with fewer video artifactsFine: Details are sharperCinema: Mellows movies, enhances detail in dark scenes.DNRReduces noise and picture degradation.On()Off°Progressive (l 76)Select “On” to enable progressive output.≥Select “Off” if the picture is stretched horizontally.≥When progressive output is on, closed captions cannot bedisplayed.On()Off°Transfer (When “Progressive” is set to “On”)Select the method of conversion for progressive output to suitthe type of material being played (l 76, “Film and Video”).Auto1 (normal):Detects 24 frame-per-second film content andappropriately converts it.Auto2: Compatible with 30 frame-per-second film content inaddition to 24 frame-per-second film content.Video: Select when the video content is distorted by usingAuto1 and Auto2.Line-in NR (Only when IN1, IN2 or DV is selected)Reduces video tape noise during transfer (copy).Depending on the software, jittering may occur.Automatic:Noise reduction only works on picture input from avideo tape.On: Noise reduction works for any video input.Off: Noise reduction is off. Select when you want to recordinput as is.° Only when you have selected “480p” in “TV Type” (l 20).[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [DVD-A] [DVD-V] [-RW‹VR›]V. Surround Sound[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [DVD-A] [DVD-V] [-RW‹VR›](Only for Dolby Digital with 2.0 or more channels)Enjoy a surround-sound effect if you are using 2 front speakers(L/R) only.Natural()Emphasis()Off^----------------------------------------JNotes≥Turn V. Surround Sound off if it causes distortion.≥V. Surround Sound does not work for SAP recordings.Dialog Enhancer[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [DVD-A] [DVD-V] [-RW‹VR›](Dolby Digital, 3-channel or over only, including a centerchannel)The volume of the center channel is raised to make dialog easierto hear.On()OffPositionTo change the display position1 (Standard) –5:The higher the setting the lower the screen moves.By using the FUNCTIONS window you can access the mainfunctions quickly and easily.[1] While stoppedPress [FUNCTIONS].≥Functions displayed dependon the type of disc.[2] Select an item with[3, 4] and press[ENTER].≥If you select “OtherFunctions”, press [3, 4] to select an item and press [ENTER].∫ To exit the FUNCTIONS windowPress [FUNCTIONS].Status messages appear on the TV when operating the unit, to showyou what operation was performed and what condition the unit is in.Press [STATUS] to change the informationdisplayed.The display changes each time you press the button.For example,∫ Display examples(1) Current medium(2) Current recording or play status, input channel≥Shows the current state of the unit and the input channel.(3) Audio type (l 27, 33)(4) Other drive mode(5) The current date and time(6) Available recording time and recording mode(e.g.: “1:34 SP” indicates 1 hour and 34 minutes in SP mode)≥Disc remaining time may slightly differ between differentmodels.(7) Elapsed play time(8) Recording time≥Shows recording time, recording mode and a rough guide tohow much space has been used for recording on the disc.1 Video menu-Change picture quality1 Audio menu-Change sound effect1 Other menu-Change the display positionFUNCTIONS windowStatus messagesNo DiscFUNCTIONS No DiscProgramCopyOther FunctionsENTERRETURN1:34 SP5/22 10:15 PMT1 00:05.14 XP T2 00:00.10 SPRemainππ πPlayRec.StereoDVD-RAM(6)(7) (8)(5)PlayRec.StereoDVD-RAM (1)(2)(3)VHS Rec. (4)VHS Rec.No display