Panasonic Diga DMR-EX77 Operating Instructions Manual

Also see for Diga DMR-EX77: Operating instructions

Contents

23RQT8859Watching analogue and digital broadcasts1 Turn on the television and select theappropriate AV input to suit theconnections to this unit.2 Press [Í DVD] to turn the unit on.3 Press [W X CH] to select the channel.Everytime you change the station, a digital channel informationappear automatically (terrestrial digital channels only).Channels are displayed in the order of digital channels first,and then followed by analogue channels.≥Digital channelYou can also select the channel with the numbered buttons.≥Analogue channelYou can also select the channel with the following steps.1 Press [ANALOGUE CH].2 Press the numbered buttons to select the channel.∫If New service message appearsWhen a new DVB channel is added this unit will be informedautomatically. Then the confirmation message appears. If youselect “Yes” on the display, Auto-Setup starts (all channelsettings and all created favourite groups are deleted. Thetimer recording programmes are also cancelled.).The display/hide setting can be changed (➡ 67, New ServiceMessage).[Note] (Digital broadcast only)≥This unit can receive Standard Definition (SD) broadcasts, but isunable to receive High Definition (HD) broadcasts.When High Definition (HD) programmes are broadcast, “Unable todecode HD” is displayed in the digital channel information(➡ below).≥This unit can receive free cable television but it cannot receive paidservices.While stoppedPress [STATUS ] to show the informationscreen.To switch information of the current programme and the nextprogrammePress [2, 1].To select the information for other stationsPress [3, 4].≥Press [OK] to watch the selected station.To show detailed information about the programmePress [STATUS ] again (only when “info ” is displayed).≥Signal QualityNo Signal: The digital broadcast signal is not being received.Bad Signal: Due to poor signal conditions, etc., the digital broadcastsignal has been interrupted.No Service: No broadcasts are currently available.∫ To change the group to easily select one of yourfavourite channels (➡ 69)You can press the “Blue” button to change the group (e.g., TV, Radio,Edit Favourites screen) and then press [3, 4] to select the channel.∫ To change the length of time digital channelinformation is displayedYou can change the length of time digital channel information(➡ 67, On-Screen Messages).[Note]≥By following the information sent from the station, you can checkthe programme information.≥If you record a digital radio broadcast or a digital broadcast that isnot being received correctly, digital channel information is alsorecorded and will remain visible during playback.∫ If a software update is available, a notification isdisplayed on the digital channel informationPress the “Red” button to launch software update screen.This unit is a DVD recorder with an integrated DVB tuner. Thismeans that you can receive and record both analogue andterrestrial digital channels without having to connect an additionalDVB receiving unit.Select the channele.g., 5: [0] ➡ [0] ➡ [5]15: [0] ➡ [1] ➡ [5]115: [1] ➡ [1] ➡ [5]e.g., 5: [0] ➡ [5]15: [1] ➡ [5]STATUSREC MODERECMANUAL SKIPCREATECHAPTERFUNCTIONMENUDIRECTNAVIGATORGUIDERETURNPLAY/x1.3PAUSESTOPSLOW/SEARCHSKIPCHPAGESELECTINPUT0987654321CHAVÍTVDRIVESELECTÍDVDVOLDELETEEXITOKOPTIONANALOGUECHG-CodeAUDIO DISPLAYTIME SLIP PROG/CHECK3,4,2,1OKSTATUS23ANALOGUECH“Blue”“Red”NumberedbuttonsREC OPEN / CLOSE2 3RECRECRECRECA New DVB Service has been found.Start the DVB Auto-Setup?Selecting the DVB Auto-Setup will deletethe current Favourite settings and all Timer Programmes.New ServiceNoYesOK RETURNDigital channel informationIf “No Signal” or “Bad Signal” is displayed, check thefollowing:≥Adjust the position and direction of the aerial.≥Check that the current digital broadcast channel is correctlybroadcasting.352 ABC2 No Signal All Services18:53Change FavouriteinfoABC News19:00 - 19:30 NOWMulti AudioEncrypted PGCurrent timeDuring scrambled broadcasting(Cannot be viewed with this unit.)Broadcast timeProgramme is broadcast in multi-channelsound (➡ 43, DVB Multi Audio)GroupChannelProgramme nameChange thegroup(➡ below).Signal Quality (➡ below)Station NameProgress of the current programmeThe parental ratings level is displayed.352 ABC2 No Signal All Services18:53Change FavouriteSoftware updateABC News19:00 - 19:30 NOWMulti AudioEncrypted PGSoftware updateSTEP 3 Set up to match your television and remote control/Watching analogue and digital broadcasts