Panasonic Diga DMR-EZ49V Operating Instructions Manual

Contents

70VQT2J52Additional connectionsReference≥Connect to terminals of the same colour.≥To enjoy multi-channel surround sound DVD-Video, connect anamplifier with Dolby Digital, DTS and MPEG decoders.“Digital Audio Output” in the Setup menu (> 65)≥When this unit is connected to an amplifier with an optical digitalaudio cable and connected to a television with an HDMI cable, youcan enjoy the highest quality of audio from the disc by setting“Digital Audio Output” to “Optical Only” in the Setup menu (> 66).In this case audio is only output from the amplifier not the television.≥Before purchasing an optical digital audio cable (not included),check the terminal shape of the connected equipment.≥You cannot use DTS Digital Surround decoders not suited to DVD.≥Connect to terminals of the same colour.DVD output and DVD/VHS outputThe unit has DVD/VHS common out terminals and DVD priority outterminals.≥The DVD priority out terminals can also output the VHS signal.However this is not possible during DVD recording or DVD timerrecording.DVD/VHS common outDVD priority outConnecting a television with AUDIO/VIDEORFRFININRFRFOUTOUTOPTICALDIGITAL AUDIO OUT(PCM/BITSTREAM) OUTVIDEOAV2 (EXIT) AV1 (TV)R- AUDIO-LOPTICALDIGITAL AUDIO OUT(PCM/BITSTREAM) OUTVIDEOR- AUDIO-LAUDIO INR LVIDEOINThis unit’s rear panelAudio/Video cableTelevision’s rear panelConnecting an amplifier with a digitalinput terminalConnecting a stereo amplifierRequired settingOPTICALDIGITAL AUDIO OUT(PCM/BITSTREAM) OUTVIDEOR- AUDIO-LOPTICAL INOptical digitalaudio cableDo not bendsharply whenconnecting.This unit’s rear panelInsert fully, with thisside facing up.Amplifier’s rear panelOPTICALDIGITAL AUDIO OUT(PCM/BITSTREAM) OUTVIDEOR- AUDIO-LAUDIO INR LAudio cableThis unit’s rear panelAmplifier’s rear panel