Getting startedVQT3C7720Settings1 Turn on the TV, then select theappropriate AV input to suit theconnections to this unit.2 Press [Í] to turn the unit on. (> 18)3 Select the language.∫ When using a Single cable router1 Press [RETURN ] after selecting thelanguage.2 Go to page 23, step 1.4 Follow the on-screen instructions andmake the following settings.≥Country≥Number of cables to connect≥Search modeAuto Setup starts.These operations (Searching Satellite and SearchingChannels) may take some time.After tuning has been completed, clock will be setautomatically.If the clock setting screen appears, set the timemanually (> 87, Clock).5 Set “Power Save” to “On”, “On Timer”or “Off”, then press [OK].When “Easy Setting has been completed.” appears,Easy Setting is complete.To stop partwayPress [RETURN ].To restart set up1 Press [FUNCTION MENU].2 Select “Setup” in “Others”, then press [OK].3 Select “Auto Setup” in “DVB Tuning”, then press [OK].¾ If the TV aspect setting screen appears (> 84, TVAspect)¾ To confirm that channels have been tuned correctly(> 24, Using Channel List)Easy SettingAuto SetupRETURNSatelliteProgressThis will take up to 40 minutes.Checking LNB1SatelliteLNB in 1 LNB in 2Press RETURN to skip Satellite installationSearching SatelliteChecking... Checking...On It will go into the Power Save in Standbymode.On Timer Set the start and stop time and thenpress [OK].≥“Power Save in Standby” is activatedwhen the set time comes.Off It is possible to start quickly from thestandby mode. (Quick Start mode)≥If you use Home Network ( DLNA )Server function (> 86), select “Off”.This function is not available with othersettings.Power Save in StandbyFrom ToPower Save0 6On
