104ApplicationsReceiving data via infraredYou must activate the infrared port and stay in the Idle or Main menudisplay to receive data via infrared.Activating the infrared portd Main menu > Applications > Infrared1. [5] (Change) to turn the infrared port on2. [w] or [6] (Back) repeatedly to go back to the Idle or Mainmenu displayReceiving dataIn Idle or Main menu display:1. When the icon ( ) is displayed, sender can transfer data2. A confirmation message appears when transfer is complete3. [5] (Save)Received Contacts cards are always stored in the Phone Contacts list.If a received picture or sound file already exists, your phone prompts youto rename or overwrite it.Note: You may answer an incoming call during data transfer, but it isadvisable to connect the Personal handsfree accessory so as not to movethe phone away from the infrared beam.The filename should include only alphanumeric letters (i.e. A-Z, a-z, or 0-9).If the received Contacts card contains letters other than alphanumericletters, they may be displayed incorrectly.To save battery power, deactivate the infrared port when not in use. Theinfrared port automatically turns off in 10 minutes and the icon disappearsunless you manually deactivate it.
