38MessagesSetting the MMS serverMMS message server settings must be configured before using theservice. Your multimedia configuration settings may already be setby your service provider. If settings are not available, contact yourservice provider.d Main menu > Messages > Settings > MMS > Server list1. [192] to scroll to the required server 7 [6] (Edit)2. [192] to edit the required item 7 [5] (Save)3. [5] (Launch)The following information is available for each server setting: Servername, IP address, IP port, MMSC address, Linger time,Connection (CSD or GPRS), CSD and GPRS.Send optionsYou can set the following options for outgoing MMS messages.d Main menu > Messages > Settings > MMS > Send options1. [192] to scroll to the required setting 7 [5] (Select)Note: You need to configure CSD or GPRS before configuring the serversettings. See “Data connections” on page 75.DeliveryreportChoose whether or not to receive a confirmation that yourmessage has been delivered.[192] to scroll to On or Off 7 [5] (Select)Own addressChoose whether or not to show your address to therecipient.[192] to scroll to Hide or Show 7 [5] (Select)Validity periodSet the period that messages are stored at the Messagecentre.[192] to scroll to 1 hour, 12 hours, 1 day, 1 week orMaximum 7 [5] (Select)Priority Set the priority level for your outgoing messages.[192] to scroll to High, Normal or Low 7 [5] (Select)
