Panasonic ET-MDNHM10 Operating Instructions Manual

Also see for ET-MDNDV10: Operating instructions

Contents

Panasonic ET-MDNHM10 Operating Instructions Manual Manual pdf 9 page image

SpecificationsENGLISH - 9SpecificationsThe specifications of the Interface Board are as follows.r Interface Board for HDMI 2 input (Model No.: ET‑MDNHM10)Compatible slot SLOT NX specificationConnecting terminal 2 sets, HDMI 19p, HDCP 2.2 compatible, Deep ColorcompatibleCompatiblesignalResolutionMoving image signal: 480i *1 /576i *1 to 4 096 x 2 160Still image signal: 640 x 400 to 3 840 x 2 400 (non-interlace)Dot clockfrequency 25 MHz to 594 MHzDimensionsWidth 151 mm (5-15/16")Height 38.5 mm (1-17/32")Depth 142 mm (5-19/32")Weight 340 ] (12.0 ozs.)*1 Pixel-Repetition signal (dot clock frequency 27.0 MHz) onlyr Interface Board for DVI‑D 2 input (Model No.: ET‑MDNDV10)Compatible slot SLOT NX specificationConnecting terminal 2 sets, DVI-D 24p, DVI 1.0 compliant (only single linksupported), HDCP compatibleCompatiblesignalResolutionMoving image signal: 480i *1 /576i *1 to 2 048 x 1 080Still image signal: 640 x 400 to 1 920 x 1 200 (non-interlace)Dot clockfrequency 25 MHz to 162 MHzDimensionsWidth 151 mm (5-15/16")Height 38.5 mm (1-17/32")Depth 142 mm (5-19/32")Weight 350 ] (12.3 ozs.)*1 Pixel-Repetition signal (dot clock frequency 27.0 MHz) onlyNotef “SLOT NX” is a name of the slot unique to Panasonic supporting the signal input for the 4Kimage.f The video signal that can actually display will vary depending on the display device (projectoror flat panel display) that the Interface Board is installed. For details, refer to the OperatingInstructions of your display device.

/ 10

Related manuals for Panasonic ET-MDNDV10