Panasonic EvalBoard PAN4555 Manual 

Contents

Panasonic EvalBoard PAN4555 Manual  Manual pdf 3 page image

CLASSIFICATIONEinstufung PRELIMINARY No.DS-Eval4555-2400REV.01SUBJECTThemaEvalBoard PAN4555 PAGESeite 3 of 16CUSTOMER’S CODEEvalPAN4555PANASONIC’S CODE DATEDatum 30.03.2007European Technology CenterPanasonic Electronic Devices (EUROPE) GmbHAPPROVEDgenehmigtCHECKEDgeprüftDESIGNEDErstellt1. OVERVIEWThe EvalKit PAN4555 allows quick and versatile evaluation of the of the wireless modulePAN4555. Currently the Embedded Bootloader plus test software from Freescale Inc. is providedfor RF performance testing, as for example Packet Error Rate (PER). Testing requiresinstallation of the GUI TestToolTM from Freescale Inc. on a computer with 2 COM ports.Remark: ZigBee sample application software for this EvalKit is under preparation and will beprovided with the next version of this CD.1.1. CONTENTS OF THE EVALUATION KIT:- 2 x ISM RF Transceiver Testboards- 2 x PAN4555 mounted on a carrierboard- 2 x 2,45GHz antennas with male SMA plugs- 2 x RS-232 cables- 2 x battery adaptors with cable for d. c. power supply- 1 x CD ZigBee-Modem PAN4555 with software and documentation1.2. HARDWARE NEEDED- 12 x Batteries (AA size) or 2 supplies 6-9Vdc with 2mm plugs- PC with at least 1 (preferably 2) free COM Ports- a Flashing Device for the MC9S08GT60 (Recommended: P&E USB HCS08/HCS12 Multilinkadapter USB-ML-12 available through http://www.pemicro.com/) or athttp://www.freescale.com/ZigBee)1.3. SOFTWARE NEEDEDa) Freescale TestToolTM from Freescale Inc. as on the CD included, folder 132xxEVKCD\Install.The embedded bootloader is required for TestToolTM and already installed on PAN4555, forreinstalling it with USB HCS08/HCS12 Multilink adapter USB-ML-12 use the file in the folder\embedded_bootloader\embedded_bootloader_4555.s19.Remark: All the files in the folder 132xxEVKCD are unchanged versions from Freescale Inc..Because of different hardware platforms of freescale reference devices and PAN4555 they doNOT apply to PAN4555 directly. Check for updates of this folder athttp://www.freescale.com/ZigBee)b) Software Flash Utility; recommended is the P&E USB HCS08/HCS12 Multilink adapterUSB- ML-12 available through http://www.pemicro.com/ . See also folder132xxEVKCD\Drivers.c) For the development of software based on ZigBeeTM, IEEE802.15.4 or SMACTM theIntegrated Development Environment (IDE) MetrowerksTM CodeWarrior IDE fromwww.metrowerks.com is required.Important: To install and run the programs you need Administrator rights on the test PC