Panasonic EvalBoard PAN4555 Manual 

Contents

Panasonic EvalBoard PAN4555 Manual  Manual pdf 6 page image

CLASSIFICATIONEinstufung PRELIMINARY No.DS-Eval4555-2400REV.01SUBJECTThemaEvalBoard PAN4555 PAGESeite 6 of 16CUSTOMER’S CODEEvalPAN4555PANASONIC’S CODE DATEDatum 30.03.2007European Technology CenterPanasonic Electronic Devices (EUROPE) GmbHAPPROVEDgenehmigtCHECKEDgeprüftDESIGNEDErstellt4. OPERATION OF THE TESTBOARDIf not already done please follow the basic setting up instructions as in Chapter 2Check if the jumper plugs are set as indicated in Figure 2. The functions of the jumpers are asfollows:jumper name function to set as in Figure 2A Vcc for module in Slot A* do not careB Vcc for module in Slot B* do not careC Vcc for module in Slot C* yesD Vcc for module in Slot D* do not careJP2 5Vdc feed to Slots A, B, C, D** noJP3 Vcc setting 2.1-2.7-3.4V; see Table 2 no for Vcc=2.7Vdc defaultJP4 Vcc setting 2.1-2.7-3.4V; see Table 2 yes for Vcc=2.7Vdc defaultJP7 Vcc regulator output feed to A, B, C, D yes(Table 1)* An amperemeter for measuring module current can be inserted instead of the jumper** +5Vdc supply (independent on JP3 and JP4 settings) option is provided for application demos.It is not used on PAN4555 carrierboard.Check if the port switches S1 near to the COM2 connector for RS232 are all set to off positionexcept the selected UART as noted in Figure 2/Table 3.5. POWER SUPPLY5.1. D.C. POWER FROM A POWER SUPPLYSet the power switch SW7 to the position 2 = off.Connect a power supply with 7-9VDC to one of the power inputs (P1 or P2).In case of P1 use a plug with 5,5mm diameter and the positive terminal at the centre contact.For use of the P2, 2mm contacts the black socket P2-X1 is the negative/ground contact andthe red socket P2-X2 is the positive terminal.A linear regulator on the testboard regulates the input voltage down to the +5V DC boardsupply. A second linear regulator regulates the +5V DC down to the module VCC supply of2,1/2,7/3,4Vdc