7.3 Operation of Band Comparison Function7.3.1 Examples of Linear counter Settings Operation of band comparison match flagCount valueComparison data 0Lower limit Upper limit0-8,000 -6,000 -4,000 -2,000 +2,000 +4,000 +6,000 +8,000Comparisonmatch 0 flagComparisonmatch 1 flagComparisonmatch 2 flagComparisonmatch 3 flagComparison data 1 Comparison data 2Comparison data 3 Comparison data 4 Examples of output pattern settingsComparisondataBand comparisonvalue OutputpatternComparisonmatch 0 flagComparisonmatch 1 flagComparisonmatch 2 flagComparisonmatch 3 flagLowerlimitUpperlimit0 -8,000 -6,000 Setpattern ON OFF ON ON1 -4,000 -2,000 Setpattern OFF ON OFF ON2 +2,000 +4,000 Setpattern OFF OFF ON ON3 -8,000 -4,000 Setpattern OFF OFF ON OFF4 +4,000 +8,000 Setpattern ON OFF OFF ONKEY POINTS• The output is off in the areas of the bands in which comparison data is notset.• Multiple comparison data can be set for the same band.• If the contents of comparison data 0 to 15 are overlapped and the specifiedreset conditions are different, the priority of data is in the following order.(High) 0 > 1 > 2 > 3 > 4 > 5 > 6 > 7 > 8 > 9 > 10 > 11 > 12 > 13 > 14 > 15 (Low)Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
