6.5 Holding Max./Min. Values6-116.5 Holding Max./Min. Values Overview of FunctionsThis function maintains the maximum and minimum values of acquired data. When themaximum and minimum value hold settings are valid, the maximum and minimum digitalconversion values will be maintained and stored in the following unit memories.• If the function has not been enabled with the configuration settings, the function will notwork with the hold execution relay turned ON.• When the hold execution relay is turned ON, the values at that time will be preset asmaximum and minimum values in the unit memories.• The maximum and minimum values will be stored in the unit memories even if the holdexecution relay is turned OFF or the unit is set into PROG. mode.• The maximum and minimum values are held on a channel-by-channel basis.Hold executionrelay (*1)(K)(t)Hold executionflag (*2)(Flag)DigitalconversionvalueHolds min. value inunit memoryHolds max. value inunit memoryRefreshes max.valueRefreshesmin. valueRefreshesmin. valueUnit memoryPhone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
