LED Display14-214.1 Lighting State of LED for EtherNet/IP SettingThe state of the EtherNet/IP communication can be confirmed from the LED lighting state.14.1.1 Lighting Patterns When Starting PLCThe lighting-up of the indicator is checked when the PLC starts.The lighting-up of the indicator is checked after the PLC is powered on and after all the LEDsother than MS and NS turn on and turn off.The procedure of checking the lighting-up of the indicator is as follows.After the check, the indicator varies according to the state of the EtherNet/IP setting.Example) For FP7 (CPS41ES)Order of checking the lighting-up of indicatorProcedure MS NS Lighting state1 MS: Green ON, NS: OFF, Turns ON for 0.25 seconds.2 MS: Green ON, NS: OFF, Turns ON for 0.25 seconds.3 MS: Green ON, NS: Green ON, Turns ON for 0.25 seconds.4 MS: Green ON, NS: Red ON, Turns ON for 0.25 seconds.5 MS: Green ON, NS: OFF
