17To return to the SET UP menuMove the cursor to RET and press the PAGE button. TheSET UP menu appears.To display the CAMERA ID on the monitor screenMove the cursor to CAMERA ID in the SET UP menu andselect ON.3. Electronic Light Control Setting (ELC)The electronic light control function eliminates interferenceby strong background lighting which makes the camerapicture dark, such as a spotlight. In the ELC mode, morephotometric weight is given to the desired point of thescreen (to where the important object is located).3-1. ELC/AUTO-GAIN/AUTO-SENS-UP detectioncontrol area setting (ELC CONT)1. Move the cursor to the ELC parameter and press thePAGE button.The ELC CONT menu appears.2. Move the cursor to the AREA parameter and select thedesired detection area. You can select the desireddetection area from followings.ALL: All areas on the monitor screen are detected.CENTER: The photometric weight is given to the centerof the monitor screen.S CIRCLE (Small Circle): The photometric weight isgiven to the area within a small circle in the centerof the monitor screen.M CIRCLE (Medium Circle): The photometric weight isgiven to the area within a medium large circle in thecenter of the monitor screen.L CIRCLE (Large Circle): The photometric weight isgiven to the area within a large circle in the centerof the monitor screen.MANU: Detection areas are selectable manually. Seebelow for details.** SET UP ** P1SCANNING MODE PROGCAMERA ID *OFFELC *OFFSHUTTER OFFGAIN AUTOSENS UP OFFEND** ELC CONT **AREA ALLPEAK/AVE P....I....ARET ENDAUTO: Darker areas are masked automatically andonly brighter areas on the monitor screen aredetected.Each time you press A or B, the parameter changesas follows.ALL CENTER S CIRCLE (Small Circle)M CIRCLE (Medium Circle) L CIRCLE (Large Circle)MANU AUTODetection AreaALLDetection Area50 % SensingAreaCENTERDetection AreaS CIRCLE(Small Circle)Detection AreaM CIRCLE(Medium Circle)100 % SensingArea