16Setup item Description Pageq CAMERA ID Specifies the camera title. Through this item, a camera title is created withalphanumerics and symbols and displayed on the screen.18w ELC Specifies the ELC function. 19e SHUTTER Specifies the electronic shutter speed. 20r GAIN Specifies the gain. 21t SENS UP Specifies electronic sensitivity enhancement. 21y BINNING Specifies the binning. 21u OUTPUT SEL The output signals of the RGB/YPbPr output connector are specified. 21i HDMI OUTPUT The output signals of the HDMI output connector are specified. 21o SCENE FILE Registers the settings of details, gamma, hue, etc. 22DTL MODE Specifies the details. 22RED DTL Adjusts the enhancement of red edge. 22GAMMA Specifies the gamma correction level. 23KNEE Adjusts the knee point. 23BLACK STRETCH Toggles the black stretch function on and off. 23D-RANGE Toggles the dynamic range between NORMAL and EXPAND. 23WHITE CLIP Adjusts the white clip level. 24FLARE COMP Toggles the flare compensation on and off. 24DNR Selects the level of the digital noise reduction function. 24MATRIX Adjusts the hue and chroma. 24CHROMA GAIN Adjusts chroma gain. 25TOTAL PED Adjusts the pedestal level. 25FILE LABEL Puts a label name instead of a scene file number. 26AWC MEMORY Specifies the destination where the AWC setting is saved. 26!0 WHITE BAL Specifies white balance adjustment. 27!1 BLACK BAL Adjusts the black balance. 28!2 SYNC Specifies the synchronization type. 28!3 ELECTRIC ZOOM Toggles the electronic zoom on and off. 29!4 FREEZE Toggles the freeze function on and off. 29!5 FLIP ENABLE Toggles vertical image flip on and off. 30!6 MIRROR ENABLE Toggles horizontal image flip on and off. 30!7 STATUS DISPLAY Toggles vertical and horizontal image flip status display on and off. 30!8 SD ASPECT Specifies the display format for the SD format. 30Setup through the SETUP MenuPerforming each setting item in the SETUP menu should be completed in advance to use this unit. Perform the settings foreach item in accordance with the conditions of the camera shooting area.Note:In addition to the SETUP menu, this system has a simplified menu (SEL menu) that is displayed using the [SEL] button on•the front face of the CCU. Refer to page 31 for further information about the SEL menu.About the setup menusThe following items can be set with use of the SETUP menu.