Panasonic GP-US932CSXE Operating Instructions Manual

Panasonic GP-US932CSXE Operating Instructions Manual Manual pdf 18 page image

18q Camera title setting [CAMERA ID]This item specifies the camera title. The camera title that indicates the camera location and other information about the camerais created with alphanumerics, symbols and displayed on the screen. The camera title is named with up to 16 characters.Follow the procedure below to specify the camera title.Top screen of SETUP menu Title creation screen Display positioning screen** SET UP ** P1CAMERA ID *OFFELC *OFFSHUTTER OFFGAIN OFFSENS UP OFFBINNING OFFOUTPUT SEL RGBHDMI OUTPUT YPbPr(422)ENDABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789().,'":;&#!?=+-*/%$ÄÜÖÆÑÅSPACE*POSI RET END RESET................FLOOR 1Step 1Set “CAMERA ID” to “ON” and press the [SEL] button.The title creation screen appears.→Important:When “CAMERA ID” is set to “OFF”, the camera title•does not appear even after setting the camera title.Note:Even when “CAMERA ID” is set to “OFF”, pressing the•[SEL] button allows the title creation screen to appear.Step 2Move the cursor to the target character by pressing the [g],[h], [e] and [f] buttons, and press the [SEL] button.The entered characters are displayed in the editing area.→To revise a character, move the cursor to “• ←” or “→”and press the [SEL] button. Move the cursor to thecharacter to be revised in the entry range and reenter acorrect character.To enter a blank, move the cursor to “SPACE” and press•the [SEL] button.To delete all the entered characters, move the cursor to•“RESET” and press the [SEL] button.Step 3Move the cursor to “POSI” and press the [SEL] button aftertitle entry.The display positioning screen appears and the entered→camera title blinks.Step 4Use the [g], [h], [e] and [f] buttons to decide the titleposition, and hold down the [FREEZE MENU ] button for 2seconds or more.The display position is determined and the title creation→screen appears again.Editing area