Panasonic GP-VD150 Operating Instructions Manual

Also see for GP-VD150: Brochure & specs Operating instructions

Panasonic GP-VD150 Operating Instructions Manual Manual pdf 17 page image

17Parts and their functionsp Camera unit1 Wireless remote controller signal light-sensingareaLight sensors are located in two places at the front of thecamera pedestal.2 Status display lampThis lights in the following way depending on the status ofthe unit.Orange: When the standby status is establishedGreen: When the power is onRed: When trouble has occurred in the unitGreen and blinks twice:When a signal matched by the remote controlID has been received from the wirelessremote controller (optional accessory) whilethe power is onOrange and blinks twice:When a signal which is not matched by theremote control ID has been received fromthe wireless remote controller (optionalaccessory) while the power is on3 Camera headThis rotates in the horizontal direction.4 Lens unitThis rotates in the up and down direction.5 IR ID switches [IRID][CAM1] [CAM2] [CAM3] [CAM4]These are used to select the ID of the wireless remotecontroller (optional accessory).The IR ID switch settings “CAM1” to “CAM4” correspondto the [CAM1] to [CAM4] buttons on the wireless remotecontroller.6 HDMI connector [HDMI]This is the HDMI video output connector.7 Anti-theft wire mounting holeUse this hole to attach the wire bracket.8 Service connectorThis connector is used only when maintenance is carriedout.9 DC IN connector [12V IN ]Connect the AC adapter supplied with the unit to thisconnector to supply the DC 12 V voltage to the unit.