Panasonic GSM EB-A100 Service Manual

– 4-2 –4.1.5. Spurious Emissions at Antenna Connector4.1.6. Residual Peak PowerEqual to or less than 70 dBc (BW = 300 kHz)4.2. Rx Characteristics4.2.1. SensitivityE-GSM 900 Full Rate SpeechThe reference sensitivity performance in terms of frame erasure, bit error, or residual bit error rates (whichever is appropriate) isspecified in the following table, according to the propagation conditions.The reference sensitivity level is < -102 dBm.NOTE: 1 < α < 1.6. The value of α can be different for each channel condition but must remain thesame for FER and class 1b RBER measurements for the same channel condition.Limits(dBm)Frequency Range FrequencyoffsetFilterBandwidthApproxVideo B/W E-GSM 900 GSM1800/1900100 kHz to 50 MHz – 10 kHz 30 kHz –36 –3650 MHz to 500 MHz – 100 kHz 300 kHz –36 –36500 MHz to 1 GHz 0 to 1MHz 100 kHz 300KHz –36 –361 GHz to 12.75 GHzExcl. relevant TX bandE -GSM : 880 MHz to 915 MHzDCS : 1710 MHz to 1785 MHz-and the Rx bands925 MHz - 960 MHz1805 MHz - 1880 MHz0 to 10 MHz> 10 MHz> 30 MHz(off trom edgeof relevant Tx band)100 kHz300 kHz3 MHz300 kHz1 MHz3 MHz–30–30–30–30 (1.0 GHz - 1.710 GHz)–36 (1.710 GHz - 1.785GHz)–30 (1.785 GHz - 12.75GHz)Relevant TX band:E -GSM : 880 MHz to 915 MHzDCS :1710 MHz to 1785 MHz1.8 MHz to 6.0 MHz> 6.0 MHz30 kHz100 kHz100 kHz300 kHz–36–36–36–36Channels Propagation ConditionsTU highPropagation ConditionsRAPropagation ConditionsHTStatic ConditionsTes t Limiterror rate%MinimumNo ofsamplesTest Limiterror rate%MinimumNo ofsamplesTest Limiterror rate%MinimumNo ofsamplesTest Limiterror rate%MinimumNo ofsamples16400020,000,0008,200TCH/FS FERClass lb (RBER)Class ll (RBER)6.742*α0.42/α8.338,9001,000,000120,0007.5 24,000 9.33 60,0000.122*α0.41/α2.439