- 40 -This item is used to start the unit demonstration.(Only when the mode is at the position)≥ If [DEMO MODE] is switched to [ON] and you press the MENU button when there is no SD cardinserted and while this unit is connected to the AC adaptor, the demonstration automaticallystarts.If any operation takes place, the demonstration is canceled. However if no operations take placefor approx. 10 minutes, the demonstration automatically starts again. To stop the demonstration,set [DEMO MODE] to [OFF] or insert an SD card.This item is used to start the Optical Image Stabilizer demo.(Only when the mode is at the position)≥ Select [O.I.S. DEMO] and press the ENTER button, the demonstration automatically starts.When you press MENU button, the demonstration will be canceled.You can select the language on the screen display and the menu screen.This item is displayed only when an Eye-Fi card is inserted.Please refer to page 87.This item is displayed only when an Eye-Fi card is inserted.Please refer to page 88.[DEMO MODE]: [SETUP] # [DEMO MODE] # [ON]/ /[O.I.S. DEMO]: [SETUP] # [O.I.S. DEMO][LANGUAGE]: [SETUP] # [LANGUAGE] # desired setting[Eye-Fi TRANSFER][Eye-Fi DIRECT]
