49VQT3Y48It is possible to set the focus and exposure to the subject specified on the touchscreen.The focus and exposure will keep following the subject automatically even if it moves.(Dynamic tracking)1 Touch .≥ When [FACE RECOG.] (l 61) is [ON] and a registered face is detected, the target isautomatically locked.2 Touch the object and lock the target.≥ When you touch the head of the object, the target frameon the head gets locked and tracking starts.≥ Touch the object to be changed again when you want tochange the target.≥ When the Intelligent Auto Mode is selected, the settingbecomes (Normal) and touched object is tracked.Selection becomes (Portrait) when target frame islocked on a face. (It may turn to (Normal) even if thetarget is locked on the face when a spotlight is shining or with a dark scene.)3 Start recording.∫ About target frame≥ When target lock fails, the target frame blinks in red and then disappears. Touch acharacteristic part (colour etc.) on the object to lock onto it again.≥ When the button is pressed halfway in Still Picture Recording Mode, the focus is set tothe object that is locked. The target frame turns green when it focuses, and the targetcannot be changed.≥ This function cannot be used in Manual Mode. When Manual Mode is set in Still PictureRecording Mode, it can only be used with some settings in Scene Mode.≥ It may track different objects or may not lock the target depending on the recordingconditions such as the following:j When the object is too large or too smallj When colour of the object is similar to the backgroundj When the scene is dark≥ When the target is locked in Still Picture Recording Mode, the screen may become dark orthe AF assist lamp may be performed. (l 72)≥ AF/AE tracking will be cancelled in the following cases.j When the mode is changedj When the unit is turned offj When the Scene Mode is setj Switch to Intelligent Auto Mode/Manual Modej Switch to recording of yourselfAF/AE trackingA Target frame
