54VQT3Y48≥ Depending on the recording conditions (type of smile, camera shake, etc.), the face of thesubject may not be detected correctly.≥ The number of recording pixels are (3200k1800) or (1920k1080). (l 69)≥ When still pictures that have been recorded using the Smile Shot are displayed asthumbnails, the appears.≥ When the AF/AE tracking function is target locking a face of the subject, still pictures areonly recorded if a smiling face is detected on the locked subject. When the Smile Shotfunction is set to ([FACE RECOG.]), it will record only if a face of a subject registeredwith [FACE RECOG.] is locked as a target.When the button is pressed, the flash is activated and the picture will berecorded. Use the Built-in flash in order to record still pictures in dark places.Each time the icon is selected, the indication changes by one setting in the following order:ß ([ON]) # ßA ([AUTO]) # ([OFF])≥ The unit automatically determines if the flash is necessary even when it has been set toby detecting the ambient brightness. (If it determines that the flash is necessary, theindication lights up in red.)∫ To adjust the brightness of the flash≥ If the ß indication etc. flashes when the button is pressed halfway, the flash is notactivated.≥ Do not use this unit with Filter kit (optional) or conversion lens (optional) attached.≥ The available range of the flash is approx. 1 m to 2.5 m in dark places.≥ Using the flash fixes a shutter speed to 1/500 or slower.Reduces the phenomena where human eyes become red from flashes.≥ The flash is activated 2 times.≥ The red-eye phenomenon tends to appear in certain recording conditions and more withsome people than with others.≥ When faces are detected in the Intelligent Auto Mode, the Red-eye Reduction is set to on.Built-in flash: [PICTURE] # [FLASH LEVEL] # desired settingßi: Much brighterßd0: Normalßj: Less brightRed-eye ReductionM5.8 2.1 MMENU
