- 117 -Deleting part of a scene (AVCHD/Backup for TwinCamera)Unnecessary part of an AVCHD scene or a scene recorded as Backup for Twin Camera can bedeleted.The deleted scenes cannot be restored.≥ Press the recording/playback button to switch this unit to the Playback Mode, and touchthe play mode select icon. Then, select the AVCHD scene or a scene recorded as Backupfor Twin Camera. (l 28)1 Select the menu.2 Touch the scene with a part to delete.3 Set the section to delete by touching and slidingthe top and bottom section selection buttons .≥ It is convenient to use Slow-motion Playback and Frame-by-frame Playback. (l 93, 94)4 Touch [ENTER].5 Confirm (play back) the scene after editing by touching [YES].≥ A confirmation message appears when [NO] is touched. Proceed to Step 7.6 Stop the playback.≥ A confirmation message appears.7 Touch [ENTER].≥ Repeat Steps 2-7 to continuously delete parts from other scenes.To complete editingTouch [Return].≥ Deleting a part of a scene cannot be performed when there are 99 scenes in a single date.≥ It may not be possible to delete part of a scene with a short recording time.≥ The scene will be divided into two scenes when the middle part of a scene is deleted.: [EDIT SCENE] # [SECTION DELETE]MENU0h00m15s0h00m15s0h00m15s
