- 161 -≥ Setting cannot be performed while operating monitoring with a smartphone.Touch [Setup] and select desired setting.∫ [Home Monitor Connect]You can display the registration screen for a Device ID and Password.≥ If [QR code] is touched, a QR code will be displayed on the screen of this unit.∫ [Remote Voice Level]You can set the initial remote voice level and speaker volume level of the remote voice function.≥ The mode cannot be switched to another one during home monitoring operations.≥ Although home monitoring can be performed with the battery, we recommend you use the ACadaptor.≥ It is recommended to use this unit fixed so that it will not move since it may cause false detection.≥ Power of this unit will automatically turn off when monitoring condition continues forapproximately 10 days.≥ [REC MODE] is set to [HE].≥ [ZOOM MODE] is set to [Opt.Zoom 20k].≥ The following recording modes are not available (l 53):j Creative Control Modej HDR Movie Modej FULL HD Slow Motion Video Modej /4K Photo Mode≥ Backup for Twin Camera is not available during home monitoring.≥ If you record an image when the LCD monitor of this unit is closed with the screen facing outward,the LCD monitor turns off.≥ The password for the home monitor settings will change when [Reset Wi-Fi Settings] isperformed. Set the home monitor settings of the smartphone again and reconnect to this unitwhen [Reset Wi-Fi Settings] is performed.Changing the home monitor settings of this unit(Volume high)/ (Volume low)WX970 VX870
