- 143 -3 Touch the smartphone on of this unit.≥ Touch the NFC mark while a message asking you to touch theNFC mark on the device is displayed on the smartphone screen.≥ If the unit is not recognised even when touching the smartphone,change positions and try again.≥ The connection cannot be established while this unit is recording.≥ A confirmation screen is displayed on the screen of asmartphone. Touch [YES] to start home monitor.≥ This unit is turned on even if it touches the smartphone on ofthis unit, where this unit is turned off with a LCD monitor.∫ If the device is Android (non-NFC-compatible) or iOS1 Press Wi-Fi button on this unit and touch [Hom.Monitor].2 Start up the smartphone application “Image App”.≥ When a Wi-Fi connection guidance screen is displayed, select [NO].≥ Use the smartphone to start home monitor.To exit [Hom.Monitor]:Touch [EXIT] displayed on the screen of this unit or press the Wi-Fi button.≥ The message is displayed. Touch [YES] to close the indication.≥ After turning off this unit with the LCD monitor, you can also turn on this unit and start the NFCcommunication by touching the smartphone on of this unit. (If you have turned off this unitwith the power button, this unit will not turn on by touching the smartphone on of this unit)≥ The following operations allow you to register up to ten smartphones. If the number exceeds ten,smartphone information with the oldest registration date and time will be deleted.j Touching an NFC-compatible smartphone on this unit.j Setting [Direct Connection Password] to [OFF] and connecting this unit and a smartphone directly.≥ Please refer the instructions for the device you are using for information on how to set up and usea NFC-compatible smartphone.The image and sound may be interrupted or the connection may be terminated depending on yourline conditions. Use the recommended optimal speed (upstream) below as a guide to makenecessary settings.∫ Recommended optimal speed (upstream) for the broadband line, mobilerouter (tethering), etc. connected to this unit≥ For information on the optimal speed, contact your service provider, etc.Line qualityRecommended optimal speed(upstream)500 kbps or higherIf you have difficulty establishing a connection with [Hom.Monitor] or the connection isdisconnected, wait for a while, and connect again. If the connection still cannot be established,check the settings from the menu of the smartphone application “Image App” below.[ (MENU)] # [Application function] # [Home Monitor] # [Advanced Settings]Refer to [Help] in the “Image App” menu about the settings.
