- 73 -It is possible to continuously record motion picture to an SD card when there is no space availablein the built-in memory. (It allows you to record only to SD card from built-in memory.)≥ Set [MEDIA SELECT] to [Built-inMemory].≥ Set [REC FORMAT] to [AVCHD]. (l 71)≥ Insert an SD card.≥ is displayed on the screen. will disappear when space in the built-in memory is goneand the recording to the SD card starts.≥ Relay Recording can only be performed once.≥ Combine the scenes that were relay-recorded using the [RELAY SCENE COMBINE] intothe SD card. (l 106, 113)≥ Once you have performed [RELAY SCENE COMBINE], you can use the Relay Recordingfunction again. If the [RELAY REC] is set to [ON] without performing the [RELAY SCENECOMBINE], a message is displayed. You will be able to perform Relay Recording by touching[YES], but you will not be able to perform the [RELAY SCENE COMBINE] after that.≥ Still pictures are recorded to the SD card after Relay Recording.≥ is displayed on the thumbnail display during the playback of the scene that was relay-recorded on the built-in memory.Detected faces appear with frames.≥ Up to 5 frames are indicated. Larger faces and faces nearer to the centre of the screen takepreference over others.∫ Prioritised face framingPrioritised face framing is displayed as orange frames. Focus and adjustment of brightness will beperformed against the prioritised face framing.≥ The prioritised face frame is displayed only with Portrait Mode in Intelligent Auto Mode orIntelligent Auto Plus Mode.≥ The white frame is for face detection only.≥ Focus will be set to prioritised face framing when the button is pressed halfway whenrecording still pictures. Prioritised face framing will turn to green when the focus is set.[RELAY REC]: [RECORD SETUP] # [RELAY REC] # [ON][FACE FRAMING]: [RECORD SETUP] # [FACE FRAMING] # desired setting[PRIMARY]:Only the prioritised face framing is displayed.[ALL]:All face detection framings are displayed.[OFF]:Cancel the setting.W570MMENUMENU
