21DVQX1102Inserting/removing the batteryCharging and recording time≥ The above charging times apply when the supplied battery charger is used.≥ The times given apply when the ambient operating temperature is 25 oC and the relativeoperating humidity is 60%. Charging time may be longer at other temperatures and humiditylevels.≥ The continuous recordable time given applies under the conditions below. The time becomesshorter under other conditions.j The LCD monitor is openj A cable is not inserted to the external output terminal≥ “h” is an abbreviation for hour, “min” for minute and “s” for second.≥ These times are approximations.≥ The indicated charging time is for when the battery has been discharged completely.Charging time and recordable time vary depending on the usage conditions such as high/low temperature.Install the battery by inserting it in thedirection shown in the figure.≥ Insert the battery until it clicks and locks.Removing the batteryMake sure that the power switch is set to OFF and thestatus indicator is turned off, and then remove by holdingonto it taking care not to drop. (l 25)While pressing the battery release button, removethe battery.Charging/Recording timeBattery modelnumberVoltage/Capacity(minimum)ChargingtimeSystemFrequency setting(l 29)Continuouslyrecordable timeSupplied battery/AG-VBR59 (optional) 7.28 V/5900 mAh 3 h 20 min 59.94 Hz 3 h 25 min50.00 Hz 3 h 35 min