85VQT4C76∫ To set the White Balance manually1 Select , fill the screen with a white subject.2 Touch and set the blinking .≥When using the viewfinder, press and hold theCAMERA FUNCTION button.≥ When the screen turns black instantly and the displaystops flashing and then lights constantly, the setting iscomplete.≥ If the display continues flashing, the White Balance cannot be set. In this case, useother White Balance Modes.≥ When the display flashes, the Manual White Balance previously adjusted is stored.Whenever recording conditions change, re-set the White Balance.≥ When setting both the White Balance and the iris/gain, set the White Balance first.≥ is not displayed on the screen when is being set.Manual shutter speed/iris adjustmentShutter Speed:Adjust it when recording fast-moving subjects.Iris:Adjust it when the screen is too bright or too dark.≥Press the iA/MANUAL button or the CAMERA FUNCTION button to switch to ManualMode. (l 83)For how to perform the settings when using the viewfinder, refer to page 84.≥Press the iA/MANUAL button to switch to Manual Mode. (l 83)1 Touch [SHTR] or [IRIS].2 Touch / to adjust settings.≥ Touch [SHTR]/[IRIS] to complete the adjustments.Shutter speed:1/60 to 1/8000≥ If [AUTO SLOW SHTR (2D)] is set to [ON], the shutter speed will be set between 1/30 and1/8000.≥ If [DIGITAL CINEMA] is set to [ON], the shutter speed will be set between 1/48 and 1/8000.(When [AUTO SLOW SHTR (2D)] is set to [ON], the range is 1/24 to 1/8000.)≥ The shutter speed closer to 1/8000 is faster.≥ The shutter speed will be set between 1/2 and 1/2000 in Still Picture Recording Mode.Iris/Gain value:CLOSE !# (F16 to F1.7) !# OPEN !# (0dB to 18dB)≥ Value closer to CLOSE darken the image.≥ Value closer to 18dB brighten the image.FOCUSWBSHTRIRISFOCUSWBSHTRIRISMNLHC-X900MAWB AWBHC-X900MHC-X800SHTRIRIS
