- 147 -Connecting this unit to a DLNA-compatible TV via Wi-Fi, you can play back scenes and still pictureson the TV.A DLNA-compatible TV1 Press Wi-Fi button.2 Touch [DLNA Play ].≥ If you touch [Change AP], you can switch the wireless access point to another one that has beenregistered to this unit.≥ If you touch [CANCEL], the Wi-Fi connection is cancelled.≥ When the connection is complete, the screen of this unit turns off. To display it again, touch thescreen.3 Select this unit (SSID) by the TV side.≥ Select the media (SD/MEM) and select the motion picture (AVCHD) or still picture (JPEG) toplayback.4 Perform playback operations with the TVremote control.≥ Playback operations may differ depending on the TV in use.≥ The following operations can be performed if a colour buttonis pushed.Blue/Red: Skip playback≥ Fast forward/Fast rewind playback cannot be performed.≥ You cannot perform playback operations with this unit.To exit the playback on the TV:Touch [EXIT] or press Wi-Fi button.A message is displayed. Touch [YES] to exit.≥ The images recorded in 3D are played back as 2D.≥ Scenes recorded in iFrame/MP4 cannot be played back.≥ Depending on the TV used, it may not playback in AVCHD picture quality even when the scenerecorded in AVCHD is played back.Wi-Fi [HC-X920]/[HC-X929]/[HC-X920M]Playing back on a TV≥ Before using, perform the preparations for using the Wi-Fi function. (l 130)≥ Please read the operating instructions for the TV about connecting TV to the wirelessaccess point.≥ Do not remove the SD card while playing back on a TV.(Examples of operations duringmotion picture playback)A Skip playbackB StopC Playback/Pause
