- 72 -Use this function to record an image with vivid colour, like an image on a movie film.≥ Switch to Manual Mode. (l 55)≥ Set [ZOOM MODE] to [Opt.Zoom 12k]. (l 71)≥ Set [REC MODE] to [PH], [HA] or [HG]. (l 71)≥ The images may not appear smooth.It is possible to continuously record motion picture to an SD card when there is no space availablein the built-in memory. (It allows you to record only to SD card from built-in memory.)≥ Set [MEDIA SELECT] to [Built-inMemory]. (l 22)≥ Set [REC MODE] to [PH], [HA], [HG], [HE] or [1080/50p]. (l 71)≥ Insert an SD card.≥ is displayed on the screen. will disappear when space in the built-in memory is goneand the recording to the SD card starts.≥ Relay Recording can only be performed once.≥ Combine the scenes that were relay-recorded using the [RELAY SCENE COMBINE] intothe SD card. (l 108, 115)≥ Once you have performed [RELAY SCENE COMBINE], you can use the Relay Recordingfunction again. If the [RELAY REC] is set to [ON] without performing the [RELAY SCENECOMBINE], a message is displayed. You will be able to perform Relay Recording by touching[YES], but you will not be able to perform the [RELAY SCENE COMBINE] after that.≥ Still pictures are recorded to the SD card after Relay Recording.≥ is displayed on the thumbnail display during the playback of the scene that was relay-recorded on the built-in memory.[DIGITAL CINEMA]: [RECORD SETUP] # [DIGITAL CINEMA] # [ON][RELAY REC]: [RECORD SETUP] # [RELAY REC] # [ON]MENUHC-X920MMENU
