Panasonic HDC-DX1PC Operating Instructions Manual

Also see for H1 - Toughbook - Atom Z540: Operating instructions Operating instructions Operating instructions Operating instructions Operating instructions

Contents

Panasonic HDC-DX1PC Operating Instructions Manual Manual pdf 33 page image

33LSQT1093Setup≥The recordable times will vary depending onthe status of use. These times areapproximations.The recordable time will become shorter in thefollowing cases:– When you use both the viewfinder and theLCD monitor simultaneously while rotatingthe LCD monitor frontward to record yourself,using the 0 Lux MagicPix function, etc.– When you use this unit with the LCD monitorlit up by pressing the POWER LCD button.≥The batteries heat up after use or charging.This unit will also heat up while being used.This is not a malfunction.≥Be aware that the operating time of the batterywill become shorter in low temperatures. Werecommend charging a spare battery for usewhen recording.ª About the remaining batterycapacity indicationThe remaining battery capacity is displayed inminutes when using the Panasonic battery thatyou can use for this unit. It may take time todisplay the remaining battery capacity.≥The display changes as the battery capacityreduces.# # # # .If there is less than 3 minutes remaining, thenwill become red. If the batterydischarges, then will flash.≥The remaining battery capacity may not bedisplayed correctly where the temperature islow or high or if the battery was not used for along period of time.To correctly display the remaining batterycapacity, recharge the battery, discharge it andthen charge it again. (Even if this operation isperformed, it may not be possible to display theremaining battery capacity correctly if thebattery was used for a long period of timewhere the temperature is low or high or if thebattery was repeatedly charged.)≥The maximum amount of remaining batterycapacity able to be indicated is 240 minutes. Ifthe actual remaining time exceeds240 minutes, the indication will stay green andwill not change until the remaining time fallsbelow 240 minutes.≥Depending on the conditions of use, the timedisplayed on the remaining battery capacityindication will change so use it as anapproximation.≥When turning the mode dial to switch modes,the time indication will turn off in order torecalculate the remaining battery capacity time.≥When using batteries made by othercompanies the remaining battery capacity willnot be shown.Connecting to the AC outlet1 Connect the AC cable to the ACadaptor and the AC outlet.2 Connect the DC cable to the ACadaptor.3 Connect the DC cable to the DCinput terminal DC IN 7.3V.≥Do not use the AC cable with any otherequipment as it is designed only for thisunit. Do not use the AC cable from otherequipment with this unit.≥While the DC cable is connected to the ACadaptor, the battery will not charge.90min