Panasonic HDC-HS9 Operating Instructions Manual

Also see for HDC-HS9: Operating instructions Brochure & specs Brochure & specs

Contents

Panasonic HDC-HS9 Operating Instructions Manual Manual pdf 112 page image

112VQT1N87If faulty management information is found when the HDD or a SD card is accessed, one of the followingmessages may appear. Be sure to follow the messages. (Repairing may take time depending on theerror.)≥ Use a sufficiently charged battery or the AC adaptor.≥ Depending on the condition of the data, it may not be possible to completely repair the data.≥ If the recovery fails, you will no longer be able to play back the scenes recorded before the powerwent off.≥ When data recorded on another device is recovered, it may not be possible to play back the data onthis unit or the other device.≥ If recovery fails, turn the power of the unit off and on again after waiting a while. If recovery failsrepeatedly, format an SD card or the HDD on the unit. Please be aware that if an SD card or HDD isformatted, then all the data recorded on the SD card or HDD will be erased. Back up important dataon a PC, DVD disc etc.≥ If the thumbnail information is recovered, displaying the thumbnails may become slower.PUSH THE RESET SWITCH.An irregularity in the unit has been detected. Press the RESET button to restart the unit. (l 118)CANNOT CHECK CONNECTED DEVICE. DISCONNECT THE USB CABLE FROM THIS UNIT.≥ The DVD burner is not correctly connected.Disconnect and then reconnect the Mini AB USB Connection Cable.≥ Connect a DVD burner that is compatible with this unit. (l 86)PLEASE CHECK EXTERNAL DRIVE OR DISC.A disc that cannot be used when connecting the unit to the DVD burner has been inserted, or theDVD burner is not recognised properly. Connect the Mini AB USB Connection Cable again andinsert a disc to copy the data. (l 86)CANNOT COPY TO DISC WITH RECORDED IMAGES. INSERT DISC WITH NO RECORDEDIMAGES.Data cannot be copied since a disc that cannot be used by connecting the unit and the DVD burneror a used disc is inserted. Please use a new disc. (l 86)DISCONNECT USB CABLE.The unit cannot correctly establish the connection to the PC or printer. Disconnect and thenreconnect the USB cable.DISCONNECT USB CABLE.You cannot turn off this unit while it is connected to a PC or a DVD burner.About recoveryCONTROL DATAERROR HAS BEENDETECTED. (SD CARD)CONTROL DATAERROR HAS BEENDETECTED. (HDD)THUMBNAIL DATAERROR IS DETECTED.