Panasonic HDC-HS900PC Owner's Manual

Also see for HDC-HS900P: Owner's manual Owner's manual

Contents

Panasonic HDC-HS900PC Owner's Manual Manual pdf 137 page image

Theunitisputintorecordingpauseapprox.1secondwhentheunitisturnedonwiththemodesetto_ or O.• Dependingontherecordingconditions,starttimemaybelongerthan1second.• IntheQuickpoweronmode,thezoommagnificationbecomes1×.Thisunitisputintorecordingpauseapprox.0.6secondsaftertheLCDmonitorisreopenedortheviewfinderisextended.• When in Quick start standby mode about 80% of the power used in Recording pausemode is being consumed, so the recording time will be reduced.• Quick start will not work if the [SD CARD] is selected in the [MEDIA SELECT], even if thereis no SD card inserted.• Change the mode to _ or O.1 Set [QUICK START] to [ON].2 Close the LCD monitor and retract theviewfinder while the mode is set to mor _.The status indicator O flashes green and the unitgoes into Quick start standby mode.• The lens cover does not close.3 Open the LCD monitor or extendthe viewfinder.The status indicator O lights red and the unitis put into recording pause.• Quick Start Standby Mode is canceled ifabout 5 minutes have elapsedmode is set to []• Depending on the recording conditions and menu settings, time for Quick start may belonger than 0.6 seconds.• It may take some time for Automatic white balance to adjust.• In the Quick Start Mode, the zoom magnification becomes 1 ×.• If [ECONOMY] (-) 47) is set to [5 MINUTES] and the unit automatically goes into QuickStart Standby Mode, close the LCD monitor and viewfinder and then open the LCD monitoror extend the viewfinder again.• Turn the unit off using the power button.• Quick start standby mode cannot be released by the remote control.Please refer to page 53.48VQT3K69