Manual shutter speed/iris adjustment_OShutter Speed:Adjust it when recording fast-moving subjects.Iris:Adjust it when the screen is too bright or too dark.• Press the iA/MANUAL button or CAMERA FUNCTION button to switch to ManualMode, (-) 82)• For how to perform the settings when using the viewfinder, refer to page 82.1 Touch [SHTR] or [IRIS].2 Touch _/_ to adjust settings.• Touch [SHTR]/[IRIS] to complete the adjustments._s"_RShutter speed:1/60 to 1/8000• If [AUTO SLOW SHTR (2D)] is set to [ON], the shutter speed will be set between 1/30 and1/8000.• If [DIGITAL CINEMA] is set to [ON], the shutter speed will be set between 1/48 and 1/8000.(When [AUTO SLOW SHTR (2D)] is set to [ON], the range is 1/24 to 1/8000.)• The shutter speed closer to 1/8000 is faster.• The shutter speed will be set between 1/2 and 1/2000 in Still Picture Recording Mode.[_lris/Gain value:CLOSE _ (F16 to F1.7) _ OPEN _ (0dB to 18dB)• Value closer to CLOSE darkens the image.• Value closer to 18dB brightens the image.• When the iris value is adjusted to brighter than OPEN, it changes to the gain value.• To return to auto setting, press the iA/MANUAL button again.• When setting both the shutter speed and the iris/gain value, set the shutter speed and thenset the irislgain value.Manual shutter speed adjustment• When the shutter speed is set lower than 1/15 in the Still Picture Recording Mode, using atripod is recommended. Also, white balance cannot be set. The shutter speed will be set to1/30 when the unit is turned on again or when the Quick start is performed.• You may see a band of light around an object that is shining very bright, or highly reflective.• During normal playback, image movement may not look smooth.• If you record an extremely bright object or record under indoor lighting, color and screenbrightness may change or a horizontal line may appear on the screen. In this case, recordin the intelligent Auto Mode or set the shutter speed to 1/60 in areas where the powersupply frequency is 60 Hz, or 1/100 in areas of 50 Hz.Manual iris/gain adjustment• Luminance level and histogram are displayed during the iris adjustment. (-) 77)• If the gain value is increased, the noise on the screen increases.• Depending on the zoom magnification, there are iris values that are not displayed.84VQT3K69