117VQT1A34Others≥The memory capacity indicated on the label ofan SD card is the total of the capacity forcopyright protection and management and thecapacity which can be used on the unit, acomputer etc.≥During prolonged use, the unit’s surfaces andthe SD card will heat up slightly. This is normal.Always set the mode dial to OFF wheninserting or removing an SD card.While this unit accesses the SD card (whileor is being displayed/the accesslamp is lit), do not remove the SD card,operate the mode dial, turn off the power orshake or impact the unit.≥Be sure to insert miniSD Cards in the dedicatedcard adaptor before use. Inserting a card in thisunit without the adaptor may damage the unitor the card.≥Do not insert an empty card adaptor in this unit.Do not leave the adaptor in this unit whileinserting or removing miniSD Cards. This maycause the unit to malfunction.≥When the LCD monitor gets dirty, wipe it with adry soft cloth.≥In a place with drastic temperature changes,condensation may form on the LCD monitor.Wipe it with soft dry cloth.≥When the unit has become very cold, forexample due to storage in a cold area, its LCDmonitor will be slightly darker than usualimmediately after the power is turned on. Thenormal brightness will be restored when theunit’s internal temperature rises.About the SD cardAbout the miniSD CardLCD monitorExtremely high precision technology isemployed to produce the LCD Monitor screenfeaturing a total of approximately 251,000pixels. The result is more than 99.99%effective pixels with a mere 0.01% of thepixels inactive or always lit. However, this isnot a malfunction and does not affect therecorded picture.
