110VQT2B44BackupWith otherproducts2 Dubbing images onto othervideo deviceImages played back on this unit can be dubbed onto a DVD recorder or video device.≥ Images are dubbed in standard quality.≥ Use the AC adaptor to free you from worrying about the battery running down.1 Connect this unit to a video device and then change the mode to .2 Start playback on this unit.3 Start recording on the connected device.≥ To stop recording (dubbing), stop playback on this unit after stopping recording on the recorder.≥ If the date and time display and function indication are not wanted, cancel them before dubbing.(l 34, 96)Change the video input on thevideo device and TV that this unitis connected to.≥ The channel set will differ depending on theterminal to which the unit is connected.≥ See the operating instructions of the videodevice for details.≥ Insert the plugs as far as they will go.≥ Do not use any other AV cables except thesupplied one.A AV cable (supplied)≥ If your recorder is not equipped with AVInput Sockets, the 21-pin Adaptor B(optional) is necessary. Consult yourdealer.If the dubbed images are played back on a wide-screen TV, the images may be stretched vertically.In this case, refer to the operating instruction of the device you are connecting to or read theoperating instructions of the wide-screen TV and set the aspect ratio to 16:9.A/V
