131VQT2B44*1 only*2 onlyIf faulty management information is found, one of the following messages may appear. Be sure to followthe messages. (Repairing may take time depending on the error.)*1 only*2 only≥ The following message is displayed when abnormal management information is detected when thescenes are displayed in thumbnail. To perform the repair, touch the scene with ° in the thumbnail,and start the playback. Please be aware that if the repair fails, scenes with ° will be deleted.≥ Use a sufficiently charged battery or the AC adaptor.≥ Depending on the condition of the data, it may not be possible to completely repair the data.≥ When data recorded on another device is recovered, it may not be possible to play back the data onthis unit or the other device.≥ If recovery fails, turn the power of the unit off and on again after waiting a while. If recovery failsrepeatedly, format a media on the unit. Please be aware that if a media is formatted, then all the datarecorded on the media will be erased.≥ If the thumbnail information is recovered, displaying the thumbnails may become slower.About recoveryCONTROL DATA ERROR HAS BEEN DETECTED. (SD CARD)CONTROL DATA ERROR DETECTED IN THE BUILT-IN MEMORY.*1CONTROL DATA ERROR HAS BEEN DETECTED. (HDD)*2THUMBNAIL DATA ERROR IS DETECTED.SOME SCENES NEED REPAIRING. PLAY SCENES TO BE REPAIRED. (IRREPARABLESCENES WILL BE DELETED.)
