142VQT3K43Keep this unit as far away as possiblefrom electromagnetic equipment (suchas microwave ovens, TVs, video gamesetc.).≥ If you use this unit on top of or near a TV,the pictures and/or sound on this unit maybe disrupted by electromagnetic waveradiation.≥ Do not use this unit near cell phonesbecause doing so may result in noiseadversely affecting the pictures and/orsound.≥ Recorded data may be damaged, orpictures may be distorted, by strongmagnetic fields created by speakers orlarge motors.≥ Electromagnetic wave radiation generatedby microprocessors may adversely affectthis unit, disturbing the pictures and/orsound.≥ If this unit is adversely affected byelectromagnetic equipment and stopsfunctioning properly, turn this unit off andremove the battery or disconnect ACadaptor. Then reinsert the battery orreconnect AC adaptor and turn this uniton.Do not use this unit near radiotransmitters or high-voltage lines.≥ If you record near radio transmitters orhigh-voltage lines, the recorded picturesand/or sound may be adversely affected.Make sure to use the supplied cords andcables. If you use optional accessories,use the cords and the cables suppliedwith them.Do not extend the cords and the cables.Do not spray insecticides or volatilechemicals onto the unit.≥ If the unit is sprayed with such chemicals,its body may be marred and the surfacefinish may peel off.≥ Do not leave rubber or plastic products incontact with the unit for a long time.When you use the unit in a sandy ordusty place such as a beach, do not letsand or fine dust get into the body andterminals of the unit.Also, keep the unit away from sea water.≥ Sand or dust may damage the unit. (Careshould be taken when inserting andremoving a card.)≥ If sea water splashes onto the unit, wipeoff the water with a well wrung cloth. Thenwipe the unit again with a dry cloth.When carrying the unit, do not drop orbump it.≥ A strong impact can break the unit’scasing, causing it to malfunction.Cleaning≥ Before cleaning, detach the battery or pullthe AC cable from the AC outlet, and thenwipe the unit with a soft, dry cloth.≥ If the unit is very dirty, dip a cloth in waterand squeeze firmly, and then wipe the unitwith the damp cloth. Next, dry the unit witha dry cloth.≥ Use of benzine, paint thinner, alcohol, ordishwashing liquid may alter the camerabody or peel the surface finish. Do not usethese solvents.≥ When using a chemical dust cloth, followthe instructions that came with the cloth.OthersCautions for useAbout this unitThe unit and the SD card becomewarm during use. This is not amalfunction.
