Panasonic HDC-TM41PC Owner's Manual

Also see for HDC-SD40P: Owner's manual Service manual

Panasonic HDC-TM41PC Owner's Manual Manual pdf 174 page image

Thisunitisputintorecordingpauseapprox.0.6secondsaftertheLCDmonitorisreopened.• WheninQuickstartstandbymodeabout60%ofthepowerusedinRecordingpausemode is being consumed, so the recording time will be reduced.Quick start will not work if there is no SD card inserted.Quick start will not work if the [SD CARD] is selected in the [MEDIA SELECT], even if thereis no SD card inserted.• Change the mode to .1 Set [QUICK START] to [ON].2 Close the LCD monitor while the mode is set toThe status indicator O flashes green and the unit goesinto Quick start standby mode.3 Open the LCD monitor.The status indicator O lights red and the unitis put into recording pause.• Quick Start Standby Mode is canceled ifabout 5 minutes have elapsedmode is set to [_• It may take some time for Automatic white balance to adjust.• In the Quick Start Mode, the zoom magnification becomes 1 x.• If [ECONOMY] (-) 41) is set to [5 MINUTES] and the unit automatically goes into QuickStart Standby Mode, close the LCD monitor and then open it again.• Turn the unit off using the power button.Starting and stopping of recording and unit on/off can be confirmed with this sound.u:_]) (Volume low)/IDOl))) (Volume high)2 Beeps for 4 timesWhen an error occurs. Check the sentence displayed on the screen. (-) 101 )42VQT3J95