• Check that the plugs are inserted as far as they go.• Always use a genuine Panasonic HDMI mini cable (RP-CDHM15, RP-CDHM30; optional).• Do not use any other AV multi cables except the supplied one.• When connecting to the component terminal of the TV, the yellow plug of the AV multi cableis not required.• When connecting to the AV terminal of the TV, do not connect the component terminal plugof the AV multi cable. Image may not display when the component terminal plug isconnected simultaneously.2 Select the video input on the TV.• Example:Select the [HDMI] channel with a HDMI mini cable.Select the [Component] or [Video 2] channel with an AV multi cable.(The name of the channel may differ depending on the connected TV.)• Check the input setting (input switch) and the audio input setting on the TV. (For moreinformation, please read the operating instructions for the TV.)3 Change the mode to _] to play back.• If you connect to a TV using an HDMI mini cable or an AV multi cable with the unit in playback mode, images will not be displayed on the screen of the unit. Check on the TV screeninstead.!!!!!IHli!!ii!!iiiiiii!iii!i!i!ili !i!!i!! iiii!iiii!iiiii!iiiii!iiiii!iiiiiO HDMI mini cable (optional) • Connecting with a HDMI mini cable (-) 77)• Playback using VlERA Link TM (-) 78)Q AV multi cable (supplied) • Connecting with the AV multi cable (-) 77)• When the AV multi cable is connected to this unit, the setup screen of the AV multidestination is displayed on the screen of this unit. Select either [COMPONENT] or [AVOUT] in accordance with the terminal connecting to the TV. (-) 77)• If the HDMI mini cable and AV multi cable are connected at the same time, output will beprioritized in order of the HDMI mini cable, AV multi cable.• If you connect to a TV using an HDMI mini cable or an AV multi cable with the unitrecording motion picture or with the PRE-REC setting on, images will not be displayed onthe TV. Check on the screen of the unit instead.Also, no audio will be played on the TV during recording mode.75VQT3J95