57VQT2N35It is possible to continuously record motion picture to an SD card when there is no spaceavailable in the built-in memory. (It allows you to record only to SD card from built-inmemory.)≥ Change the mode to .≥ is displayed on the screen. will disappear when space in the built-in memory isgone and the recording to the SD card starts.≥ Relay recording can only be performed once.≥ Combine the scenes that were relay recorded using the [RELAY SCENE COMBINE]into the SD card. (l 87, 95)≥ Once you have performed [RELAY SCENE COMBINE], you can use the Relay recordingfunction again. If the [RELAY REC] is set to [ON] without performing the [RELAY SCENECOMBINE], a message is displayed. You will be able to perform relay recording bytouching [YES], but you will not be able to perform the [RELAY SCENE COMBINE] afterthat.≥ Still pictures are recorded to the SD card after relay recording.≥ is displayed on the thumbnail display during the playback of the scene that was relayrecorded on the built-in memory.Face recognition is a function for finding faces that resemble faces which have already beenregistered and automatically prioritising focus and exposure for those faces. This functionmakes it possible to keep the face of your loved ones in focus even when they are at theback or on the end of a line in a group picture.≥ Change the mode to or .[RELAY REC]: [RECORD SETUP] # [RELAY REC] # [ON][FACE RECOG.]: [RECORD SETUP] # [FACE RECOG.] # desired setting[OFF]: The face recognition function is not available.[ON]: The face recognition function is available.[SET]: Face recognition registration/editing/cancellationMENUMENU
