Panasonic HM-TA2 Operating Instructions Manual

Also see for HM-TA2: Owner's manual Owner's manual

Contents

8 VQT3P01(Important)About the Waterproof/Dustproofand Anti-shock Performance of thisunit [HM-TA20]This does not guarantee no destruction, no malfunction, orwaterproofing in all conditions.*1 This means that this unit can be used underwater for specified timein specified pressure in accordance with the handling methodestablished by Panasonic.*2 “MIL-STD 810F Method 516.5-Shock” is the test method standard ofthe U.S. Defense Department, which specifies performing drop testsfrom a height of 122 cm, at 26 orientations (8 corners, 12 ridges,6 faces) using 5 sets of devices, and passing the 26 orientationdrops within 5 devices. (If failure occurs during the test, a new set isused to pass the drop orientation test within a total of 5 devices.)Panasonic’s test method is based on the above “MIL-STD 810FMethod 516.5-Shock”. However, the drop height was changed from122 cm to 150 cm dropping onto 3 cm thick plyboard. This drop testwas passed.(Disregarding appearance change such as loss of paint or distortionof the part where drop impact is applied.)Waterproof/Dustproof PerformanceThis unit’s waterproof/dustproof rating complies with the“IP58” rating. Provided the care and maintenance guidelinesdescribed in this document are strictly followed, this unit canoperate underwater, to a depth not exceeding 3 m for a timenot exceeding 60 minutes. (*1)Anti-shock PerformanceThis unit also complies with “MIL-STD 810F Method 516.5-Shock”. This unit has cleared a drop test from a height of1.5 m onto 3 cm thick plywood. In most cases this unit shouldnot sustain any damage if dropped from a height notexceeding 1.5 m. (*2)