VQT3P01 85≥ The battery or environment is at an extremely high or low temperature.Wait until the temperature has returned to an appropriate level and trycharging again. If you are still unable to charge, there may be a fault inthis unit.When cleaning, wipe this unit with a soft, dry cloth.≥ If the unit is very dirty, dip a cloth in water and squeeze firmly, and thenwipe the unit with the damp cloth. Next, dry the unit with a dry cloth.≥ Use of benzine, paint thinner, alcohol, or dishwashing liquid may alterthe unit body or peel the surface finish. Do not use these solvents.≥ When using a chemical dust cloth, follow the instructions that camewith the cloth.≥ Do not press the LCD monitor with excessive force. Uneven coloursmay appear on the LCD monitor and it may malfunction.≥ When the LCD monitor gets dirty, wipe it with a soft cloth such as eyeglass cleaner.≥ Do not touch the LCD monitor with your finger nails, or rub or presswith strong force.≥ It may become hard to see or hard to recognise the touch when theLCD protection sheet is affixed.≥ In a place with drastic temperature changes, condensation may formon the LCD monitor. Wipe it with a soft cloth such as eye glass cleaner.≥ When the unit has become very cold, for example due to storage in acold area, its LCD monitor will be slightly darker than usualimmediately after the unit is turned on. The normal brightness will berestored when the unit’s internal temperature rises.CleaningLCD monitorExtremely high precision technology is employed to produce the LCDMonitor screen featuring a total of approximately 230,000 dots. Theresult is more than 99.99% effective dots with a mere 0.01% of thedots inactive or always lit. However, this is not a malfunction and doesnot affect the recorded picture.