VQT3M88 125CONNECTING TO A COMPUTERUSING AS A CARD READERMounting your camera1 Set the camera to the card reader mode (page 123).h The message [Found New Hardware] appears in the task tray,showing that the camera is recognized as a drive.h The card is recognized (mounted) as a disk, and the [CAM_SD (E:)]icon appears in the [My Computer] window.h The drive name (E:) may be different on your computer.2 Select an action.h If the [CAM_SD (E:)] window appears automatically, select the desiredprocedure from the window.3 Copy the files from your camera to the computer.Dismounting the cameraHINTi To disconnect your camera, be sure to follow the procedure below. Failureto follow this procedure may cause faulty operation of your computer orloss of card data.1 Left-click on the icon for safely removing hardware in the task tray.h A list appears showing the devices connected to the computer’s USBterminal.2 Left-click on the camera drive (E:).3 Click on the [×] button.h The camera can now be disconnected.h The drive name (E:) may be different on your computer.
