VQT3M88 43SETUP1 Image stabilizer (page 74)h Compensate for camera shakeduring recording.2 Focus (page 75)h Adjust the focus according tothe distance to the subject.3 Focus mode4 Metering mode5 ISO sensitivity (page 76)h The indicated ISO value is thestandard output sensitivity.6 White balance (page 77)7 Remaining battery powerindication (page 121): During video recording, theimage stabilizer is alwaysactive.: Camera shake in thecaptured photo iscorrected.: Camera shake during videoand photo recording iscompensated for andcorrected.: The image stabilizer is notactive.*: The camera automaticallyfocuses on the subject witha range of 10 cm (3.9”) to ∞(normal).-: The focus can be setmanually.: The camera focuses on thesubject within a range of1 cm (0.4”) to ∞ (macro).: 9-point range finder focus: Spot focusA focus mark ' appears inthe center of the LCDmonitor.n: Multi-meteringW: Center-weighted lightmeasuringY: Spot light-measuringA metering spot @ markappears in the center of theLCD monitor.=: Sensitivity is setautomatically*: Sets sensitivity to ISO 50u: Sets sensitivity to ISO 100v: Sets sensitivity to ISO 200w: Sets sensitivity to ISO 4006: Sets sensitivity to ISO 800-: Sets sensitivity to ISO 1600z: Set sensitivity to ISO 3200(HX-DC10)>: White balance isautomatically adjusteddepending on the ambientlighting (auto).: For shooting in sunnyconditions (sunny).o: For shooting in overcastconditions (cloudy).: For shooting underincandescent lighting(incandescent).: For setting the mostaccurate white balance(white set).
