Wireless communication rangeThe wireless communication range of each device in the system from the access point isapproximately 100 m (up to 328 feet). Wireless communication may be unreliable when thefollowing obstacles are located between the access point and other devices.R Metal doors or screensR Walls containing aluminum-sheet insulationR Walls made of concrete or corrugated ironR Double-pane glass windowsR Multiple wallsR When using each device on separate floors or in different buildingsNote:R The access point cannot connect wirelessly to devices other than the front door camera oroutdoor camera.R The camera’s LED indicator blinks slowly in red if it is out of range of the access point. In thiscase, confirm all connections, including those of the access point.R The signal strength can be checked with the [HomeHawk] app. For more information, refer tothe User’s Guide (page 31).Information about sensor featuresThe cameras have 2 sensor features that are used for motion detection: a visual sensor and aninfrared sensor (i.e., heat sensor).Please read the following information before deciding where to install the camera.Note:R The camera’s sensor features are not designed to be used in situations that require highreliability. We do not recommend use of the sensor features in these situations.R Panasonic takes no responsibility for any injury or damage caused by the use of the camera’ssensor features.Detection methodVisual sensor Infrared sensorThe camera detects changes in the imagesbeing displayed.R The camera detects changes in thebrightness levels of moving objects.The camera detects temperature differencesof objects in the images being displayed.R The infrared sensor uses infrared rays todetect temperature differences within itsrange that are emitted naturally by people,animals, etc.For assistance, visit www.panasonic.ca/english/support 11Installation LocationHN7051C_(en_en)_0319_ver.040.pdf 11 2018/03/19 19:00:11