Panasonic HomeHawk KX-HNC710 Installation Manuals

Also see for HomeHawk KX-HNC710: Installation guide User guide User guide

Contents

Battery chargingfor camerasR This camera has an internalrechargeable battery.R Turn the camera off beforecharging the battery. If thecamera is turned on whilecharging, it may take longer tocharge.R Make sure to charge the batteryindoors and in a dry location.R Charge the battery in a locationwith a temperature between5°C and 40°C (41°F and104°F). The battery cannotcharge in locations outside ofthese temperatures.1 Open the micro-USB jackcover (A).2 Insert the USB cable (B) intothe micro-USB connector.12115.0 V, 1.0 A or higher powersourceTurning the poweron for camerasOpen the cover on the rear of thecameras, and then slide the powerswitch to ON.Registering thecameraThis procedure is not requiredfor devices that were includedas part of a bundle.Before you can use the camera, itmust be registered to the accesspoint.If the camera is not registered toan access point, the camera’sLED indicator blinks in amber.You can register each camera byusing the registration buttons orthe [HomeHawk] app.Note:R Before registering the camera,make sure the AC adaptors ofthe access point and cameraare connected and each deviceis powered.12 For assistance, please visit http://shop.panasonic.com/supportSetup