Installation and RelocationDo not position the unit in a location whereit is unstable.To prevent fire or shock hazard, do notexpose this unit to rain or any type ofmoisture.Do not place the unit in a hot humid ordusty environment.Prolonged exposure to these adverseconditions may cause fire or electricshock.Do not block the air vents. Doing so cancause heat to build up, and may result infire.When moving the unit, be sure to unplugthe power cord from the AC outlet. If theunit is moved with the power cordattached, it can cause damage to the cordwhich could result in fire or electric shock.Do not use the hopper hanging out of atable.When carrying the unit, do not use thehopper as handles.Move this unit with two persons, and holdit by both side grips. Dropping the unit cancause injury and damage to the unit.Operating SafeguardsIf the unit falls down or gets damaged, turnthe unit off, and unplug the power cord.Otherwise, it may cause fire or electricshock.Do not place any liquids or heavy items onthe unit.Accidental spillage of liquid into the unitmay cause severe damage. If this occurs,turn the unit off, unplug the power cord,and contact your dealer for service.Do not touch the image sensor covers ortheir surroundings immediately aftercontinuous scanning.This area is very hot and can cause burns.When wiping the rollers (A) andlower-section image sensor cover, makesure to close the straight path tray.Notched section AImage sensorcoverStraight path trayIf the straight path tray is open, touchingthe notched section can cause injury.Be careful not to pinch your fingers whenclosing the front door. It can cause injury.10 Operating ManualBefore You Start