KW8M Eco-POWER METER (1A/5ACT input type)296.1.2 Instantaneous Electric Power・It displays the Instantaneous electric power.・Press ▽> to shift active power, reactive power, apparent power.Instantaneousactive power (kW) Instantaneous reactive power (kvar) Instantaneousapparent power (kVA)[kW]Lighting[kvar]Lighting[kVA]Lighting*Instantaneous reactive power is “－(minus)” value when leading phase and it shows “－(minus)“ in thedisplay. It is “+ (plus)” value when lagging phase, but it doesn’t show “+ (plus)”.6.1.3 Current・It displays the current value of the load.・Press ▽> to change L1(CT1)-phase, L2(CT2)-phase, L3(CT3)-phase current.*Before start measuring, select phase and wire system according to the measured load.When 1P3W or 3P3W is selected, it doesn’t measure 1P2W system correctly. When 3P4W system isselected, it doesn’t measure 1P2W, 1P3W, 3P3W system correctly.Select phase and wire system according to the measured system. (Refer to the explanation of settingmode.)[A]Lighting・When input current exceeds 150%F.S. at each range, 「- - - -」will be displayed.
