Sending Faxes50Sending the same documentto pre-programmed parties1 Insert the document FACE DOWN.L If necessary, press {{{{++++}}}} or {{{{----}}}}repeatedly to select the desiredresolution (page 43).2 Press {{{{BROADCAST}}}}.L You can also use the navigator key.Press {{{{<<<<}}}} or {{{{>>>>}}}}, then press {{{{++++}}}} or{{{{----}}}} until the following is displayed, andpress {{{{SET}}}}.SEND:PRESS SETL The document will be fed into the unitand scanned into memory. The unit willthen transmit the data to each entry,calling each number sequentially.L After transmission, the stored documentwill be erased automatically, and theunit will automatically print a broadcastsending report.Note:L If you select “FINE”, “SUPER FINE” or“PHOTO” resolution, the number of pagesthat the unit can transmit will decrease.L If the document exceeds the memorycapacity, sending will be canceled.L If one of the entries is busy or does notanswer, it will be skipped. All skipped entrieswill be redialed up to 2 times after all of theother entries have been called.To send the same document to more thanone party only onceYou can also select the parties for eachtransmission.1. Insert the document.2. Press {{{{>>>>}}}}.3. Press {{{{++++}}}} or {{{{----}}}} until the following isdisplayed. BROAD>PRESS SET4. Press {{{{SET}}}} to start programming theentries you want to transmit to.DIR= [00]NAVI.[+ -] & SET5. Press {{{{++++}}}} or {{{{----}}}} until the desired entry youwant to transmit to is displayed.Example: Bill65432106. Press {{{{SET}}}}.Example: DIR=Bill [01]SEND:PRESS SETL To program other entries, repeat steps 5and 6 (up to 20 entries).7. Press {{{{SET}}}} to start transmission to theprogrammed entries.To cancel the broadcast setting1. Press {{{{STOP}}}} while the unit displays thefollowing.BROADCASTINGL The display will show the following.SEND CANCELED?YES:SET/NO:STOP2. Press {{{{SET}}}}.{BROADCAST}{<}{>}{+}{-}{STOP}{SET}FACE DOWN
