Features Summary60Basic featuresCode #01: Setting the date and timeSET DATE & TIMEPRESS SETSee page 30 for details.Code #02: Setting your logoYOUR LOGOPRESS SETSee page 31 for details.Code #03: Setting your fax numberYOUR FAX NO.PRESS SETSee page 33 for details.Code #04: Printing the sending reportSENDING REPORTMODE=ERROR [±]To print and check the sending report for faxtransmission results (page 44).ERROR (default): The sending report will beprinted only when fax transmission fails.ON: The sending report will be printed out afterevery transmission.OFF: The sending report will not be printed out.Code #06: Changing the ring setting in FAXONLY modeFAX RING COUNTRINGS=3 [±]To change the number of rings before the unitanswers a call in FAX ONLY mode.You can select from 1, 2, 3 (default), 4 and 5EXT.TAM. If you are using the unit with ananswering machine, set to “5 EXT.TAM”.Code #12: Securing the remote operation forthe answering machineREMOTE TAM ACT.MODE=OFF [±]If you are using the unit with an answeringmachine, activate this feature, and program theremote activation ID to secure the remoteoperation for the answering machine.1. Follow steps 1 and 2 on page 58.2. Press {{{{++++}}}} or {{{{----}}}} to select “ON”.3. Press {{{{SET}}}}.4. Enter your ID from 1 to 5 digits, using 0–9, *and #.L The default ID is “11”.5. Press {{{{SET}}}}.6. Press {{{{MENU}}}}.Code #13: Setting the dialing modeDIALING MODEMODE=TONE [±]If you cannot dial, change this setting dependingon your telephone line service.TONE (default): For tone dial service.PULSE: For rotary pulse dial service.Code #17: Setting the ringer patternRINGER PATTERNMODE=A [±]You can select from A (default), B and C. Theselected ringer pattern will sound during setting.
