Features Summary64Advanced features!How to set menu optionsProgramming tableCode#22 To print the journal reportautomatically for fax communications.AUTO JOURNALMODE=ON [±] ONOFFTo send a document:1. Insert the document.2. Follow steps 1 and 2 above.3. Press or to select “ON”.4. Press .5. Enter the fax number.6. Press .7. Enter the transmission start time.Press to select “AM” or “PM”.8. Press .9. Press .lTo cancel after programming,press then .SETSTOPMENUSETSETSET“NEXT FAX”: This setting is effectiveonly for the next attempted faxtransmission. After transmission, theunit will return to the previous setting.“ERROR”: When the previous faxtransmission fails and you redialthe same number.lThis feature is not available forbroadcast transmission.lThe calling charge may be higher.#23If you have difficulty sending anoverseas fax, activate this featurebefore starting transmission. Thisfeature makes sending documentseasier as the transmission speed isslowed down.OVERSEAS MODEMODE=ERROR [±]Display & Feature Settings How the unit operates#25To send a fax automatically at aspecified time.This allows you to take advantageof low-cost calling hours offered byyour telephone company.lThe setting can be reserved totake place up to 24 hours inadvance.DELAYED SENDMODE=OFF [±]NEXT FAXERROROFFON /fax no. /hh:mmOFF(The default setting is in bold type.)“ON”: The unit will print the journalreport automatically after every 30new fax communications (p. 31).Note:l Step 3 may be slightly different depending on thefeature.l See page 61 for more details.1. Press .2. Press or until the following isdisplayed.Display:Press and press or untilthe desired feature is displayed.SETADVANCED MODEPRESS SETMENU#26 To print the Caller ID listautomatically.AUTO CALL. LISTMODE=ON [±] ONOFF“ON”: The unit will print the CallerID list automatically after every 30new calls (p. 25).3. Press or until the desired settingis displayed.4. Press .5. Press .MENUSET